The Brake motors are used for various applications where instantaneous stopping of the driven load is required. The operation of the brake is “FAIL SAFE TYPE” and are NORMALLY ON. The brake is applied when power to the motor is switched off or power failure occurs.When there is no power given to either motor or Brake, the Brake toque is provided by compression springs developing an axial force on the Brake armature plate which ultimately presses it against mounting flange. In this condition a nominal air gap will be available and the rotor with the frictional surfaces remains sandwiched in between armature plate and mounting plate. Release of the brake takes place when the power to the Brake and motor is supplied at the same time. Power to the Brake coil produces strong magnetic field and pulls the armature plate against the compression spring force towards the stator (Brake Coil) over the air gap and rotor becomes free to rotate. The attraction of the armature plate and returning to it’s original position takes place instantaneously thus failsafe nature is ensured in case of power failure.

Mountings

Dimensions

Foot Mounted

MOTOR FRAME	BRAKE SIZE/ TORQUE NM	D	AD	H1	H2	H3	Ll	L2	B	B1	L5	L	K	L8	T	W1	W3	S
63	5	11	115	63	158	12.5	125	100	106	80	40	23	283	95	10	35	4	7
71	5	14	140	71	176	16.0	140	112	112	90	45	30	313	105	10	35	5	7
80	10	19	162	BO	161	21.5	160	125	130	100	50	40	357	128	13	38	6	10
90S	10	24	173	90	177	27.0	175	140	132	100	56	50	404	135	la	37	8	10
90L	20	24	173	90	177	27.0	175	140	157	125	56	50	429	135	14	37	a	10
100L	35	28	195	100	245	31.0	200	160	170	140	63	60	470	165	14	42	8	12
112M	65	28	226	112	285	31.0	225	190	175	140	70	60	510	178	14	50	8	12
132S	85	38	260	132	320	41.0	258	216	176	140	89	80	568	198	18	55	10	12
132M	155	38	260	132	320	41.0	258	216	214	178	89	80	606	198	18	55	10	15
160M	155	42	310	160	390	45.0	320	254	260	210	108	110	713	240	25	72	12	15
160L	155	42	310	160	390	45.0	320	254	304	254	108	110	773	240	25	72	12	15
180M	250	48	360	180	445	51.5	360	279	300	241	121	110	784	260	25	80	14	15
180L	400	48	360	180	445	51.5	360	279	338	279	121	110	822	260	25	80	14	15
200L	400	55	390	200	505	59.0	400	318	370	315	133	110	903	295	30	85	16	19

Flange Mounted

MOTOR FRAME	BRAKE SIZE/ TORQUE NM	D1 J6	D2	H1	H2	H3	Ll	L2	L3	L4	L5	L6	L7	L8	Ti	W1	W3	W4
63	5	11	115	63	158	12.5	125	100	106	80	40	23	283	95	10	35	4	7
71	5	14	140	71	176	16.0	140	112	112	90	45	30	313	105	10	35	5	7
80	10	19	162	BO	161	21.5	160	125	130	100	50	40	357	128	13	38	6	10
90S	10	24	173	90	177	27.0	175	140	132	100	56	50	404	135	la	37	8	10
90L	20	24	173	90	177	27.0	175	140	157	125	56	50	429	135	14	37	a	10
100L	35	28	195	100	245	31.0	200	160	170	140	63	60	470	165	14	42	8	12
112M	65	28	226	112	285	31.0	225	190	175	140	70	60	510	178	14	50	8	12
132S	85	38	260	132	320	41.0	258	216	176	140	89	80	568	198	18	55	10	12
132M	155	38	260	132	320	41.0	258	216	214	178	89	80	606	198	18	55	10	15
160M	155	42	310	160	390	45.0	320	254	260	210	108	110	713	240	25	72	12	15
160L	155	42	310	160	390	45.0	320	254	304	254	108	110	773	240	25	72	12	15
180M	250	48	360	180	445	51.5	360	279	300	241	121	110	784	260	25	80	14	15
180L	400	48	360	180	445	51.5	360	279	338	279	121	110	822	260	25	80	14	15
200L	400	55	390	200	505	59.0	400	318	370	315	133	110	903	295	30	85	16	19

Applications

Model Selection

	9550 x KW		OR		7160 x HP
T =	———-——-——	x Safety Factor		T =	———-——-——	x Safety Factor
	N				N

T = Torque in NM
KW = Motor KW
N = Motor RPM
HP = Motor HP
Safety Factor as 2 or 3